查看: 4330|回复: 0

MA5606T开局配置总结 [复制链接]

av710t

军衔等级：

新兵

注册：2014-4-23

发表于 2015-8-24 12:22:07 |显示全部楼层

一、升级至开局版本并添加各单板

MA5606T(config)#displaylanguage

Local:

Description: CHINESE SIMPLIFIED (DEFAULTLANGUAGE)

Version: MA5600V800R105C22B056

General:

Description: ENGLISH (DEFAULTLANGUAGE)

Version: MA5600V800R105C22B056

MA5606T(config)#display board0

-------------------------------------------------------------------------

SlotID BoardName Status SubType0 SubType1 Online/Offline

-------------------------------------------------------------------------

0

1 H801MCUA Active_normal O2GN

2 H801EPBA Auto_find

3

-------------------------------------------------------------------------

电源板及业务板不能自动注册，需要手工添加或确认

MA5606T(config)#board add

{frameid/slotid<S><1,15> }:0/0

{H801MPWA<K>|H801GPBC<K>|H801EPBA<K>|ADI<K>|ADL<K>|SHD<K>|VDL<K>|H801OPFA<K>|VD

S<K>|VDT<K>}:H801MPWA

Command:

board add 0/0 H801MPWA

0 frame 0 slot board added successfully

MA5606T(config)#boardconfirm

{frameid[/slotid]<S><1,15> }:0/2

Command:

board confirm 0/2

0 frame 2 slot board confirms successfully

二、业务配置

1、修改系统名称

huawei#sysname

{ prompt<S><1,50> }:MA5606T

Command:

sysname MA5606T

MA5606T#

2、配置网管ip

MA5606T(config)#vlan 80

{vlantype<E><mux,standard,smart,super>|to<K> }: standard

Command:

vlan 80 standard

MA5606T(config)#interface vlanif80

MA5606T(config-if-vlanif80)#ipaddress 221.4.240.158 30

{ <cr>|sub<K>}:

Command:

ip address 221.4.240.158 30

MA5606T(config)#port vlan 80 0/10

MA5606T(config)#

%Mar 20 18:48:55 2008 MA5606TIFNET/2/UPDOWN

ine protocol on the interface

vlanif80 turns into UP state

3、业务vlan

MA5606T(config)#vlan 300

{vlantype<E><mux,standard,smart,super>|to<K> }:smart

Command:

vlan 300 smart

MA5606T(config)#port vlan 3000/1 0

4、添加ont能力集模板（以HG813e为例）

MA5606T(config)#ont-profile addepon profile-id

{profile-id<17,128> }:18

{ <cr>|profile-name<K>}:profile-name

{profile-name<S><1,63> }:hg813e

Command:

ont-profile add epon profile-id 18profile-name hg813e

Press 'Q' or 'q' to quit input

> User mode<1-Single user, 2-Multi user,3-Cascade user> [1]:[url=]2[/url][xyx1]

> Is UNI configuration concerned?<1-notconcern, 2-concern> [2]:

> ONT FE ports list(format: 1,3-5,7)<S><0-100> [-]:1-[url=]4[/url][xyx2]

> ONT GE ports list(format: 1,3-5,7)<S><0-100> [-]:

> Number of POTS ports<0-16> [0]:

> TDM port type<1-E1> [1]:

> Number of TDM ports<0-8> [0]:

Adding an ONT profile succeeded

Profile-ID : 18

Profile-Name : hg813e

5、建立合适的DBA模板

MA5606T(config)#dba-profileadd

{profile-id<K>|profile-name<K>|type1<K>|type2<K>|type3<K>|type4<K>|type5<K>}:p

rofile-id

{profile-id<10,512> }:20

{type1<K>|profile-name<K>|type2<K>|type3<K>|type4<K>|type5<K>}:[url=]type3[/url][xyx3]

{ assure<K> }:assure

{assure-bandwidth<512,1235456> }:4096

{ max<K> }:max

{max-bandwidth<512,1235456> }:6144

Command:

dba-profile add profile-id 20 type3 assure 4096 max 6144

6、增加ONT并绑定模板（两种方法）

MA5606T(config-if-epon-0/2)#port0 ont-auto-find [url=]enable[/url][xyx4]

1）MA5606T(config-if-epon-0/2)#ontconfirm 0

{all<K>|mac<S><14,14> }:001E-E324-A7AF

{ ontid<K>|description<K>|fec<K>|dba-profile<K>|encrypt<K>|cir<K>|profile-id<K>|

profile-name<K>}

ntid

{ ontid<0,63>}:0

{description<K>|fec<K>|dba-profile<K>|encrypt<K>|cir<K>|profile-id<K>|profile-n

ame<K> }:profile-[url=]id[/url][xyx5]

{profile-id<1,128> }:18

Command:

ont confirm 0 001E-E324-A7AF ontid 0profile-id 18

MA5606T(config-if-epon-0/2)#

等待至与终端连接相匹配

MA5606T(config-if-epon-0/2)#displayont info 0 0

------------------------------------------------------------------------------

F/S/P : 0/2/0

ONT-ID : 0

Control flag : active

Run state : up

Config state : normal

Match state : match

Ont Profile ID : 18

Authentic type : MACAddress-auth

MAC : 001E-E324-A7AF

Description :ONT_NO_DESCRIPTION

DBA Profile ID : 9

CIR Value : off

Encrypt : off

FEC : disable

------------------------------------------------------------------------------

2）MA5606T(config-if-epon-0/2)#ont add 0 001E-E324-A7AF profile-id 18dba-profile [url=]20[/url][xyx6]

{<cr>|fec<K>|encrypt<K>|cir<K>|desc<K> }:

Command:

ont add 0 001E-E324-A7AF profile-id18 dba-profile 20

7、划分ONT的端口vlan

MA5606T(config-if-epon-0/2)#ontport vlan [url=]0[/url][xyx7] [url=]0[/url][xyx8] fe [url=]300[/url][xyx9] 1-[url=]4[/url][xyx10]

MA5606T(config-if-epon-0/2)#

Add ports to the VLAN, total: 4, discarded: 0, success: 4, failed: 0

MA5606T(config-if-epon-0/2)#ontport native-vlan 0 0 fe 1 vlan 300

MA5606T(config-if-epon-0/2)#

Setting the native VLAN for the specified portsucceeded

此步骤设置HG813e四个端口的vlan，四个端口都设置为vlan 300，只有1号端口的native-vlan为300，与vlan一致，可直接接入PC。类似MA5100的LAN板设置。

8、加入业务虚端口

MA5606T(config)#service-port

{index<0,1023>|vlan<K>|desc<K> }:vlan

{ vlanid<1,4093>}:300

{adsl<K>|shdsl<K>|vdsl<K>|atm<K>|eth<K>|gpon<K>|epon<K>}:epon

{frameid/slotid/portid<S><1,15> }:0/2/0

{ ont<K> }

nt

{ ontid<0,63>}:0

{rx-cttr<K>|multi-service<K> }:rx-cttr

{ rx-index<0,511>}:6

{ tx-cttr<K>}:tx-cttr

{ tx-index<0,511>}:6

Command:

service-port vlan 300 epon 0/2/0 ont0 rx-cttr 6 tx-cttr 6

9、保存数据

[xyx1]选择多用户，单用户则只能使用1个ONT

[xyx2]ONT的FE端口号

[xyx3]TYPE2 确保带宽TYPE3 确保+最大带宽

TYPE 4 最大带宽

优先级：TYPE2>TYPE3>TYPE4

[xyx4]使能EPON端口的ONT自动发现功能

[xyx5]引用DBA模板要在此处，不然则引用默认模板9

[xyx6]第二种添加ONT方法

[xyx7]EPON端口号

[xyx8]ONT ID

[xyx9]Vlan

[xyx10]ONT端口号

举报本楼

返回列表

手机版|C114 ( 沪ICP备12002291号-1 )|联系大家 |网站地图

GMT+8, 2024-11-17 02:39 , Processed in 0.806618 second(s), 15 queries , Gzip On.

Discuz Licensed

		自动登录	找回密码
密码			注册